The Gerber Rubber Stoppers, Large 30/17x22 mm with Hole are designed for secure sealing in laboratory glassware while allowing for tubing or instrumentation access through the integrated hole. Made from high-quality rubber, these stoppers offer a tight, chemical-resistant seal and are ideal for setups requiring gas or liquid flow through the closure.
Gerber rubber stoppers provide a dependable and reusable solution for laboratory sealing and fluid/gas transfer applications.
Manufacturer P/N
03.0925
Part Number
9.112 575
Manufacturer
Gerber
Description
Single conical rubber stopper, large, 30 x 17.5/22mm, with hole for beaker, for butyrometers with two openings
NZ $20.54
Inc. GST
Manufacturer P/N
03.0900
Part Number
9.112 573
Manufacturer
Gerber
Description
GERBAL-M stopper with bush, length 23.5mm
Manufacturer P/N
03.0935
Part Number
6.264 750
Manufacturer
Gerber
Description
Weighing funnel of glass, for weighing and filling the milkpowder into the butyrometer
Manufacturer P/N
03.0920
Part Number
9.112 576
Manufacturer
Gerber
Description
Single conical rubber stopper, small, 15x10.5/13 mm for butyrometers with two openings
Manufacturer P/N
03.0902
Part Number
9.112 574
Manufacturer
Gerber
Description
Regulating pin for GERBAL-M stopper, nickel plated brass
Manufacturer P/N
03.0930
Part Number
9.112 577
Manufacturer
Gerber
Description
Glass beaker without holes for Cream Butyrometers
Manufacturer P/N
03.0910
Part Number
6.224 906
Manufacturer
Gerber
Description
Double conical rubber stopper, 36x12/14mm for milk-, skim milk- and Koehler-Cream-Butyrometer
Manufacturer P/N
03.0926
Part Number
6.202 636
Manufacturer
Gerber
Description
Single conical rubber stopper, large, 30 x 17.5/22mm, without hole, for butyrometers with two openings
Manufacturer P/N
03.0915
Part Number
6.202 638
Manufacturer
Gerber
Description
Single conical rubber stopper 35x11/16mm, acid-proof for milk, skim milk and Koehler-Cream-Butyrometer
Manufacturer P/N
03.0932
Part Number
9.112 578
Manufacturer
Gerber
Description
Glass Beaker with 16 holes for Cheese Butyrometers
Manufacturer P/N
03.0906
Part Number
6.204 137
Manufacturer
Gerber
Description
Regulating pins for GERBAL-F Stopper nickel plated brass
Manufacturer P/N
03.0931
Part Number
6.262 314
Manufacturer
Gerber
Description
Glass beaker with two holes for butter butyrometers
Manufacturer P/N
03.0933
Part Number
6.234 037
Manufacturer
Gerber
Description
Glassnail for powder milk butyrometer
Manufacturer P/N
03.0905
Part Number
6.203 883
Manufacturer
Gerber
Description
GERBAL-F stopper with ball, length 21.0 mm
It are designed for secure sealing in laboratory glassware while allowing for tubing or instrumentation access through the integrated hole. Made from high-quality rubber, these stoppers offer a tight, chemical-resistant seal and are ideal for setups requiring gas or liquid flow through the closure.
.png&w=3840&q=75)
1 min read
Learn what laboratory mortars and pestles are used for, compare porcelain, agate, glass, stainless steel and alumina materials, and understand how to select the right option for sample preparation. This guide also covers common applications, correct grinding techniques, contamination risks, cleaning and when to use a mechanical laboratory mill.
.png&w=3840&q=75)
1 min read
Explore what borosilicate glass is and why Boro 3.3 glassware is widely used in New Zealand dairy, food, environmental, biotechnology, education and university laboratories.
1 min read
A laboratory desiccator holds its contents in a dry, sealed atmosphere, protecting moisture-sensitive samples and reagents and cooling heated samples without letting them take up water. This guide covers what it is, what it is used for, the main types, the desiccants that go inside, and how it works, with an animated drying cycle and a setup finder.
1 min read
The Buchner funnel is the workhorse of vacuum filtration in New Zealand labs, separating a solid from a liquid far quicker than gravity. This guide explains what it is, what it is used for, how to set one up step by step, the main materials, and how vacuum filtration works, with an animated apparatus and a funnel finder.
1 min read
The separating funnel is the go-to tool for liquid-liquid extraction across New Zealand labs, from universities and Crown Research Institutes to environmental, water and food testing. This guide explains what it is, how it works step by step, the main shapes, and how to pick one, with an interactive process demo and finder.
NZ $20.54
Inc. GST
