Specifications
NZ $845.85
Inc. GST
The Kern & Sohn Coating Thickness Gauge is a high-precision instrument designed for accurate measurement of non-magnetic coatings on iron and steel. With a measurement range from 100 µm up to 1000 µm, it provides reliable results for a wide range of industrial and quality control applications. Featuring selectable units (µm and inch/mil) and an Offset-Accur function for precise two-point calibration, this gauge achieves high accuracy—approximately 1% of the measured value.
Scope of Supply: Coating thickness gauge, external sensor, base plate, calibration foils, and carrying case.
This Kern & Sohn Coating Thickness Gauge is essential for industries demanding precise and efficient coating thickness measurement to ensure consistent manufacturing quality and performance.
It is a high-precision instrument designed for accurate measurement of non-magnetic coatings on iron and steel. With a measurement range from 100 µm up to 1000 µm, it provides reliable results for a wide range of industrial and quality control applications. Featuring selectable units (µm and inch/mil) and an Offset-Accur function for precise two-point calibration, this gauge achieves high accuracy, approximately 1% of the measured value.
.png&w=3840&q=75)
15 mins read
Learn what laboratory mortars and pestles are used for, compare porcelain, agate, glass, stainless steel and alumina materials, and understand how to select the right option for sample preparation. This guide also covers common applications, correct grinding techniques, contamination risks, cleaning and when to use a mechanical laboratory mill.
.png&w=3840&q=75)
7 mins read
Explore what borosilicate glass is and why Boro 3.3 glassware is widely used in New Zealand dairy, food, environmental, biotechnology, education and university laboratories.
11 mins read
A laboratory desiccator holds its contents in a dry, sealed atmosphere, protecting moisture-sensitive samples and reagents and cooling heated samples without letting them take up water. This guide covers what it is, what it is used for, the main types, the desiccants that go inside, and how it works, with an animated drying cycle and a setup finder.
14 mins read
The Buchner funnel is the workhorse of vacuum filtration in New Zealand labs, separating a solid from a liquid far quicker than gravity. This guide explains what it is, what it is used for, how to set one up step by step, the main materials, and how vacuum filtration works, with an animated apparatus and a funnel finder.
10 mins read
The separating funnel is the go-to tool for liquid-liquid extraction across New Zealand labs, from universities and Crown Research Institutes to environmental, water and food testing. This guide explains what it is, how it works step by step, the main shapes, and how to pick one, with an interactive process demo and finder.
