Bohlender b.safe Level Control Set

The Bohlender b.safe Level Control Set is designed for monitoring the fill level or empty level of containers and canisters made from non-conductive materials. It provides a practical solution for laboratory container monitoring but is not suitable for use in EX zones or with an isolating amplifier.

Key Features:

• Brand: Bohlender
• Application: Monitoring fill level or empty level of containers and canisters
• Compatibility: Suitable for containers and canisters made from non-conductive materials
• Display: Mini display table, 1 channel
• Power Supply: 100 to 240 V / 50 to 60 Hz
• Sensor: Disk sensor
• Accessories: Hook-and-loop tape, hook-and-loop strips, and signal cable
• Cable Length: 2 m
• Note: Not suitable for use in EX zones or with an isolating amplifier

This level control set is suitable for laboratories requiring a reliable way to monitor liquid levels in compatible non-conductive containers and canisters.

Frequently Asked Questions

1. What is the Bohlender b.safe Level Control Set used for?

The b.safe Level Control Set is designed for monitoring fill level or empty level of containers and canisters. The stated format and features make the product suitable for routine laboratory work within that application.

2. What are the main specifications of the b.safe Level Control Set?

The main specifications of the b.safe Level Control Set are that the display is Mini display table, 1 channel and the cable length is 2 m. These are the main selection points to compare with the requirements of the laboratory task.

3. Is the b.safe Level Control Set suitable for monitoring fill level or empty level of containers and canisters?

Yes. The b.safe Level Control Set is suitable for monitoring fill level or empty level of containers and canisters. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement. Where chemicals or solvents are involved, confirm that the product material is suitable for the specific substance and conditions before use.

4. What power requirement does the b.safe Level Control Set have?

The b.safe Level Control Set has a power supply specification of 100 to 240 V / 50 to 60 Hz. This should be matched with the available laboratory power setup.

5. How does the Bohlender b.safe Level Control Set compare with Desco products?

The Bohlender b.safe Level Control Set and Desco ESD accessories support static-control setups in laboratory and technical work areas. Choose the b.safe Level Control Set when its stated format and connection method match the existing ESD system. Compare Desco when the installation uses a different mat, grounding or connection standard.